Select the size to which we must add a half size. For example, to indicate that you strap of 39.5, choose size 39 and add this option.
Half sizes are not available for all models. Make sure that the words "half-size" appears both in the product description. For any questions please contact us at the following address: firstname.lastname@example.org or via our contact form.
This cow leather called "Croupon" is tanned from 100% plant material such as bark of Mimosa, Chestnut and Quebracho. Very thick, 4.5 mm thick, it is soaked in baths tannins for nearly 30 days which gives our soles, strength and prestige..
To preserve your leather sole and avoid slipping, especially when they are new and perfectly smooth, we propose (and recommend) the laying of non-slip pads.
Boots, low shoes (black rubber pads)
Sandals and slippers (beige rubber pads +heels)
We use the same tanner as our leather sole, but we use another product of its range, which is also known in the world of luxury shoes: the collar at first. Its manufacture from 100% plant material (chromium-free) guarantee excellent foot hygiene.
The Airlite®, thanks to its formulation and processing technique, is very light, and brings great walking comfort, excellent abrasion resistance, and excellent shock absorption.
Natural crepe soles have excellent properties: ecological, recyclable, abrasion resistant, highly elastic and flexible, waterproof and finally, unaffected by acidic substances, alkaline and saline.
This 100% natural rubber combines comfort, lightness, adherence, flexibility, and excellent resistance to breakage and wear.
Sport rubber sole:
City rubber sole:
This thin rubber outsole offers great flexibility and good adhesion with its pyramid-shaped profile. It is particularly recommended for children's shoes.
These micro-aerated soles are lightweight and provide excellent cushioning. You gain height and comfort.
Belt width 35mm in various lengths, many colors to choose from. Buckle made of brass, matt silver finish or matt gold look.
Leather: calf or cow
Sizes (cm): from 70 to 120cm
Care: according to selection: grease (for fat full leather of calf), waterproofing spray for velvets and metallic leathers
Belt 3.5cm wide, to match with your boots or sandals. The fine leathers (velvet, metallic, hair or glitter) are fully lined in full-grain calfskin and topstitched with a tone-on-tone thread color, thicker leathers (full-grain calfskin) are neither lined nor topstitched.
-Size: in centimeters, from 70cm to 120cm.
Belt sizes do not correspond to the length of the belt but to the distance between the end of the buckle and the central hole. This distance is shown under the diagram below. You need to measure this distance to find your belt size using one of your old belts.
How to take your measure with a used belt?
Easily determine your belt measurement using a used belt. To do this, identify the most used hole. Often the leather around this hole will be marked by the buckle. Once the hole has been identified, measure the distance between this hole and the end of the loop (see the diagram below).
How to take your measure on you?
1. Take the measurement of your waist circumference or hip circumference with a tape measure (depending on how you want to wear your belt).
2. If you are between two sizes, you should choose the larger one. For example, if your hip circumference is 93cm, we advise you to choose our belt size 95.
- Buckles: our brass buckles (nickel free) have a matt silver finish or matt gold look.
The choice of the finish aspect of the buckle, depending on the color of the belt, is made by us.
This choice is however modifiable on request during your order, in the part "leave us a message".
For more information, do not hesitate to contact us.
All our products are 100% made in France in our workshop. Most models are not available in stock, they are produced on demand which requires a manufacturing time which is on average 1 week.